Subaru Impreza 2003 Service Manual page 2971

4. Wiper Blade
A: REMOVAL
While pushing the locking clip (A) up, pull out the
blade from arm to arrow direction.
2
3
B: INSTALLATION
1) Install in the reverse order of removal.
2) Confirm that the clip is locked securely.
C:
DISASSEMBLY
1. METAL TYPE
Pull on the side (A) of wiper rubber stopper, and
then remove the rubber from blade assembly.
2. RESIN TYPE
Pull the wiper rubber top slightly from the stopper
(A) and pull it out fully.
(A)
WIPER BLADE
3
(A)
2
1
WW-00064
WW-00009
WW-00143
WW-9
WIPER AND WASHER SYSTEMS
D: ASSEMBLY
1. METAL TYPE
1) Insert the wiper rubber onto blade so that the
stopper is in the position shown.
2) Make sure the wiper rubber is securely fastened
to the pull stopper (A).
WW-00049
WW-00037