Subaru Impreza 2003 Service Manual page 2977

8. Front Washer Nozzle
A: REMOVAL
1) Remove the washer hose from washer nozzle.
2) Open the clips on the underside of hood with a
thin screwdriver or other tool, and then remove the
washer nozzle.
B: INSTALLATION
1) Install in the reverse order of removal.
2) Adjust the position of the washer liquid sprayer.
<Ref. to WW-15, ADJUSTMENT, Front Washer
Nozzle.>
C: INSPECTION
• Make sure the nozzle and hose are not clogged.
• Make sure the hose is not bent.
D: ADJUSTMENT
NOTE:
This adjustment position is for left-handed vehicle.
Carry out left-right symmetry for adjustment posi-
tions for right-handed vehicle.
1) Turn the wiper switch to OFF position.
2) When the vehicle stops, adjust the washer injec-
tion position as shown in the figure.
Injection position:
A: 350 mm (13.78 in)
B: 162 mm (6.38 in)
C: 300 mm (11.81 in)
D: 500 mm (19.69 in)
A
(1) Nozzle
FRONT WASHER NOZZLE
WW-00023
A
B B
C D
(1)
WW-00111
WW-15
WIPER AND WASHER SYSTEMS