Subaru Impreza 2003 Service Manual page 2980

WIPER AND WASHER SYSTEMS
11.Rear Washer
A: REMOVAL
1) Remove the high-mount stop light. <Ref. to LI-
27, REMOVAL, High-mounted Stop Light.>
2) Remove the washer hose from washer nozzle.
3) Open the clips on the underside of hood with a
thin screwdriver or other tool, and then remove the
washer nozzle.
B: INSTALLATION
1) Install in the reverse order of removal.
2) Adjust the position of the washer liquid sprayer.
<Ref. to WW-18, ADJUSTMENT, Rear Washer.>
C: INSPECTION
• Make sure the nozzle and hose are not clogged.
• Make sure the hose is not bent.
D: ADJUSTMENT
1) Turn the wiper switch to OFF position.
2) When the vehicle stops, adjust the washer injec-
tion position as shown in the figure.
Injection position:
A: 39 mm (1.54 in)
B: 72 ° ° ° °
(1) Nozzle
REAR WASHER
WW-00023
(1)
A
B
WW-00054
WW-18