Subaru Impreza 2003 Service Manual page 2927

8) Install the pretensioner on a wheel with tire.
Then, bundle three wire automotive harness [each
with a sectional area of 1.25 mm
more], and bind them twofold around the preten-
sioner bracket and wheel.
9) Put three tires without a wheel on the tire in-
stalled with pretensioner. Put on an additional tire
with a wheel on top, and then fasten them tight with
a rope.
10) Move the battery at least 5 m (16 ft) from the
vehicle, and secure the nearby area. Connect the
deployment tool alligator clip to the battery negative
(−) terminal.
(1) 5 m (16 ft) or more
DISPOSAL OF PRETENSIONER
2
(0.00194 sq in) or
SB-00024
SB-00025
SB-00065
SB-19
11) Connect the other cable of deployment tool to
the battery positive (+) terminal. Then deploy the
pretensioner.
CAUTION:
• After deployment, pretensioner is especially
hot. Leave it unattended for 40 minutes or long-
er.
• Do not let water get on the deployed preten-
sioner.
12) Wrap the deployed pretensioner in an airtight
vinyl bag, and discard it.
SEAT BELT SYSTEM
SB-00018
SB-00131