Subaru Impreza 2003 Service Manual page 3045

3. Datum Dimensions
A: MEASUREMENT
Refer to LOCATION for details on measurement
points. <Ref. to BS-3, LOCATION.>
NOTE:
• Using a tram tracking gauge, measure all the di-
mensions.
• When using a tape measure, carefully measure
dimensions without letting the tape measure sag or
twist.
• Measure the linear dimensions between cores of
holes.
• Suffixes "RH" and "LH" indicate right-hand and
left-hand.
(1) Tram tracking gauge
• Measure at the center of the circle around the
outside of the body panel.
(1)
(2)
(1) Datum point
(2) Body panel
(3) Outside
DATUM DIMENSIONS
(1)
BS-00033
(3)
BS-00034
BS-11
BODY STRUCTURE