Subaru Impreza 2003 Service Manual page 3008

GLASS/WINDOWS/MIRRORS
3. Power Window Control
Switch
A: REMOVAL
1. MAIN SWITCH
1) Disconnect the ground cable from battery.
2) Loosen the screw to remove the power window
main switch.
3) Disconnect the connector.
C: INSPECTION
1. MAIN SWITCH
• LHD MODEL
Measure the switch resistance.
Driver's side
Front passenger's side
POWER WINDOW CONTROL SWITCH
GW-00207 GW-00202
Switch position
AUTO UP
UP
OFF
DOWN
AUTO DOWN
UP
OFF
DOWN
GW-8
2. SUB-SWITCH
1) Disconnect the ground cable from battery.
2) Remove the switch panel.
3) Disconnect the connector.
B: INSTALLATION
1. MAIN SWITCH
Install in the reverse order of removal.
2. SUB-SWITCH
Install in the reverse order of removal.
Terminal No.
13 and 2, 1 and 5
13 and 2, 1 and 5
1 and 2
1 and 5
2 and 5
13 and 1, 2 and 5
13 and 1, 2 and 5
13 and 7, 6 and 5
5 and 6
5 and 7
6 and 7
13 and 6, 7 and 5
GW-00209
Standard
Less than 1 Ω
Less than 1 Ω
Less than 1 Ω
Less than 1 Ω
Less than 1 Ω
Less than 1 Ω
Less than 1 Ω
Less than 1 Ω