Subaru Impreza 2003 Service Manual page 2856

AIRBAG SYSTEM (DIAGNOSTICS)
10.Clear Memory Mode
A: OPERATION
1) Turn the ignition switch to ON.
2) Connect the ground terminal (ground terminal
"A") to diagnosis connector terminal No. 1 in the in-
strument panel lower cover area.
(1)
(1) Diagnosis connector
(2) Ground terminal "B"
(3) Ground terminal "A"
3) While the warning light flashes, connect another
diagnosis terminal (ground terminal "B") to diagno-
sis connector terminal No.2.
4) Once the memory is erased, the warning light re-
turns to the normal flash rate (0.6 sec on). The fail-
ure to recover the normal flash rate indicates that
trouble parts still remain. Having repaired such
parts, erase the memory again and confirm that the
normal flash rate has returned.
5) When the memory has been cleared, disconnect
the ground terminal from the diagnosis connector.
6) Wind tape around the ground terminal and return
it to its original position.
CLEAR MEMORY MODE
(2)
(3)
1 2
B82
3 4 5 6
AB-00138
AB-30