Subaru Impreza 2003 Service Manual page 2939

10.Combination Switch (Light)
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the instrument panel lower cover. <Ref.
to EI-43, REMOVAL, Instrument Panel Assembly.>
3) Remove the screws which secure the upper col-
umn cover to lower column cover.
4) Disconnect the connector from combination
switch.
5) Remove the screws which secure the switch,
and then remove the switch.
B: INSTALLATION
Install in the reverse order of removal.
COMBINATION SWITCH (LIGHT)
LI-00009
LI-00068
LI-11
C: INSPECTION
Measure the combination switch resistance.
(A)
8 7
17 16 1514131211 10
(B)
8 7
17 16 1514131211 10
(A) LHD model/RHD model (for Europe)
(B) RHD model (Except for Europe)
1. LIGHTING SWITCH
LHD model and RHD for Europe model:
Switch position Terminal No.
OFF
Tail 14 and 16
Head 13, 14 and 16
RHD except for Europe model:
Switch position Terminal No.
OFF
Tail 9 and 15
Head 9, 14 and 15
2. DIMMER AND PASSING SWITCH
LHD model and RHD for Europe model:
Switch position Terminal No.
Passing 7, 8 and 16
Low beam 16 and 17
High beam 7 and 16
RHD except for Europe model:
Switch position Terminal No.
Passing 1, 2 and 9
Low beam 9 and 10
High beam 2 and 9
LIGHTING SYSTEM
6 5 4 3 2 1
9
6 5 4 3 2 1
9
LI-00184
Standard
— More than 1 MΩ
Less than 1 Ω
Less than 1 Ω
Standard
— More than 1 MΩ
Less than 1 Ω
Less than 1 Ω
Standard
Less than 1 Ω
Less than 1 Ω
Less than 1 Ω
Standard
Less than 1 Ω
Less than 1 Ω
Less than 1 Ω