Subaru Impreza 2003 Service Manual page 2993

10.Noise Suppressor
A: REMOVAL
1. SEDAN
1) Disconnect the ground cable from battery.
2) Remove the rear pillar upper trim. <Ref. to EI-48,
SEDAN MODEL, REMOVAL, Rear Quarter Trim.>
3) Remove the rear shelf trim. <Ref. to EI-53, RE-
MOVAL, Rear Shelf Trim.>
4) Disconnect the feeder cord connector from an-
tenna amplifier.
5) Disconnect the harness connector of noise sup-
pressor from terminal on glass antenna.
6) Remove the harness clip.
7) Remove the mounting nut and detach the noise
suppressor.
2. WAGON
1) Disconnect the ground cable from battery.
2) Remove the rear gate trim. <Ref. to EI-52, RE-
MOVAL, Rear Gate Trim.>
3) Disconnect the connector from noise suppres-
sor.
4) Remove the mounting nut and detach the noise
suppressor.
NOISE SUPPRESSOR
B: INSTALLATION
Install in the reverse order of removal.
ET-00063
ET-00064
ET-11
ENTERTAINMENT