Subaru Impreza 2003 Service Manual page 2852

AIRBAG SYSTEM (DIAGNOSTICS)
3. DRIVER'S AIRBAG MODULE AND PRE-
TENSIONER
1) How to disconnect:
(1) Using a flat tip screwdriver, pry the push
lock upward to unlock.
(2) Pull the connector to disconnect from driv-
er's side airbag module assembly or retractor
assembly.
2) How to connect:
Connect the connector in reverse order of discon-
necting. At this time, be sure to insert the connector
in until connecting sound is heard.
CAUTION:
• Be sure to insert the connector in until it
locks. Then pull on it gently to make sure that it
is locked.
• Be sure to push the push lock in securely.
AIRBAG CONNECTOR
4. FRONT SUB-SENSOR AND SIDE AIR-
BAG SENSOR
1) How to disconnect:
Holding outer part (A), pull it in the direction of the
arrow.
CAUTION:
When pulling, be sure to hold onto the connec-
tor and not the wire.
AB-00478
2) How to connect:
Holding the connector, and push it in carefully until
a connecting sound is heard.
CAUTION:
• Outer (A) moves back, and so do not put your
hand on the outer part.
• Be sure to insert the connector in until it
locks. Then pull on it gently to make sure that it
is locked.
AB-00479
AB-00480
AB-26
AB-00024
AB-00025