SEAT BELT SYSTEM
B: INSTALLATION
1. OUTER BELT RH AND LH (SEDAN MOD-
EL)
Install in the reverse order of removal.
CAUTION:
• During installation, make sure that the seat
belts are not twisted.
• After installation, make sure that the seat
belts can be smoothly extended and wound.
2. SHOULDER BELT CTR (SEDAN MODEL)
Install in the reverse order of removal.
CAUTION:
• During installation, make sure that the seat
belts are not twisted.
• After installation, make sure that the seat
belts can be smoothly extended and wound.
3. CENTER BELT (SEDAN MODEL)
Install in the reverse order of removal.
CAUTION:
During installation, make sure that the seat
belts are not twisted.
4. OUTER BELT RH AND LH (WAGON
MODEL)
Install in the reverse order of removal.
CAUTION:
• During installation, make sure that the seat
belts are not twisted.
• After installation, make sure that the seat
belts can be smoothly extended and wound.
5. SHOULDER BELT CTR (WAGON MOD-
EL)
Install in the reverse order of removal.
CAUTION:
• During installation, make sure that the seat
belts are not twisted.
• After installation, make sure that the seat
belts are smoothly extended and wound.
6. CENTER BELT (WAGON MODEL)
Install in the reverse order of removal.
CAUTION:
During installation, make sure that the seat
belts are not twisted.
REAR SEAT BELT
C: INSPECTION
1. OUTER BELT RH AND LH (SEDAN MOD-
EL)
Check for the following, and replace with new parts
if necessary.
• Seat belt is slackened, bent, or frayed. Seat belt
is abnormally wound or extended.
2. SHOULDER BELT CTR (SEDAN MODEL)
Check for the following, and replace with new parts
if necessary.
• Seat belt is slackened, bent, or frayed. Seat belt
is abnormally wound or extended.
3. CENTER BELT (SEDAN MODEL)
Check for the following, and replace with new parts
if necessary.
• Inner belt is deformed or damaged.
• Seat belt buckle is engaged improperly.
4. OUTER BELT RH AND LH (WAGON
MODEL)
Check for the following, and replace with new parts
if necessary.
• Seat belt is slackened, bent, or frayed. Seat belt
is abnormally wound or extended.
5. SHOULDER BELT CTR (WAGON MOD-
EL)
Check for the following, and replace with new parts
if necessary.
• Seat belt is slackened, bent, or frayed. Seat belt
is abnormally wound or extended.
6. CENTER BELT (WAGON MODEL)
Check for the following, and replace with new parts
if necessary.
• Inner belt is deformed or damaged.
• Seat belt buckle is engaged improperly.
SB-16