WIPER AND WASHER SYSTEMS
6. Front Wiper Arm
A: REMOVAL
NOTE:
The positions for RHD model are symmetrically op-
posite.
1) Open the hood.
2) Remove the cap.
3) Loosen the nut to remove arm.
B: INSTALLATION
NOTE:
The positions for RHD model are symmetrically op-
posite.
1) Install in the reverse order of removal.
2) Operate the wiper once.
3) Align the wiper blade to the ceramic print point
mark (A) of front window pane.
(A)
Tightening torque:
Refer to COMPONENT in General Descrip-
tion.
<Ref. to WW-2, FRONT WIPER,
COMPONENT, General Description.>
FRONT WIPER ARM
C: ADJUSTMENT
NOTE:
The positions for RHD model are symmetrically op-
posite.
Operate the wiper once. Align the wiper blade to
the ceramic print point mark (A) of front window
pane.
WW-00071
WW-00048
WW-12
(A)
WW-00048