Display Position; Assigning Input Channel; Startup Bitmap Output - IDK MSD-6203 User Manual

MSD-62 Series User's Guide

9.16.5 Display position

Menu Top→BITMAP→POSITION
Setting for Each output channel, each bitmap
Setting value [Fig. 9.32] Position
You can set the display position of the bitmap.
●

9.16.6 Assigning input channel

Menu Top→BITMAP→CHANNEL ASSIGN
Setting for Each input channel, Each output channel
Setting value OFF [Default], ON (BITMAP1 ON to BITMAP4 ON)
A bitmap can be treated as an input video source by assigning the bitmap to any input that is not currently
being used. Set "9.16.2 Outputting bitmap image" to "OFF" in order to assign the bitmap to an input
channel.
If multiple bitmaps are registered, select the bitmap number to be output.
If you switch an input video to a bitmap image, it takes longer time to output the image, and you cannot
perform other operations until the bitmap is displayed.
Press the MENU/SET key to apply the setting.

9.16.7 Startup bitmap output

Menu Top→BITMAP→POWER ON BITMAP
Setting for Each output channel
Setting value OFF [Default], ON (BITMAP1 ON to BITMAP4 ON)
You can enable/disable the bitmap output at startup.
138
●
TOP-LEFT
CENTER
[Default]
●
BOTTOM-LEFT
[Fig. 9.32] Position
●
TOP-RIGHT
●
BOTTOM-RIGHT