MSD-62 series Command Guide
@GMU / @SMU
Getting
Command
Response
Setting
Command
Response
Parameter
Getting
Command
example
Response
Description Getting settings for startup.
Setting
Command
example
Response
Description Setting startup channel settings to crosspoint memory 3.
Remarks
3.3.16 Bitmap
@GBM / @SBM
Getting
Command
Response
Setting
Command
Response
Parameter
Getting
Command
example
Response
Description Getting the output image.
Setting
Command
example
Response
Description Outputting bitmap 1 image to OUT1.
Remarks
106
Startup settings
@GMU
@GMU, state
@SMU, state
@SMU, state
state: Startup settings
1 to 9 = Crosspoint memory 1 to 9,
10 = Channel OFF,
11 = Last channel [Default],
12 to23 = Preset memory 1 to 12
@GMU
@GMU,3
Channel settings of crosspoint memory 3.
@SMU,3
@SMU,3
-
Outputting bitmap image
@GBM
@GBM, out_1, out_2, out_3, ・・・, out_8
@SBM, ch_1, out_1 (, ch_2, out_2・・・)
@SBM, ch_1, out_1 (, ch_2, out_2・・・)
out_1-8: Outputting bitmap image
0 = OFF [Default],
2 = Bitmap 2 ON,
4 = Bitmap 4 ON
Only registered numbers can be specified.
ch_1-8: Output channel
0 = All outputs, 1 = OUT1 to 8 = OUT8
@GBM
@GBM,1,0,0,0,0,0,0,0
OUT1: bitmap 1, OUT2 to OUT8: not output a bitmap image.
@SBM,1,1
@SBM,1,1
-
1 = Bitmap 1 ON,
3 = Bitmap 3 ON,