Input Channel Assignment; Bitmap Output At Startup - IDK MSD-501 User Manual

7.15.6 Input channel assignment

Menu Top→BITMAP→CHANNEL ASSIGN
Setting for Each input/Each output (COMMON TO OUTA AND OUTB)
Setting value OFF [Default], ON
A bitmap can be treated as an input video source by assigning the bitmap to any input that is not currently
being used. Set "7.15.2 Outputting bitmap image (P.91)" to "OFF".
If you switch a normal image to a bitmap image, it takes longer time to output the image, and you cannot
perform other operations while the bitmap is being written.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.

7.15.7 Bitmap output at startup

Menu Top→BITMAP→POWER ON BITMAP
Setting for Each output (COMMON TO OUTA AND OUTB)
Setting value OFF [Default], ON
You can enable or disable bitmap output at the time of startup.
MSD-501/502/701/702 User's Guide
93