Audio - IDK MSD-72 Series Command Reference Manual

3.3.9 Audio

@GSL / @SSL
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting the set audio output level.
Setting Command
example Response
Description Setting OUT1 audio output level to -4 dB.
Remarks
@SOL
Setting Command
Response
Parameter
Setting Command
example Response
Description Lower 1 dB of audio output level of OUT1.
Remarks
Audio output level
@GSL
@GSL, level_1, level_2, level_3, level_4
@SSL, ch_1, level_1 (, ch_2, level_2･･･)
@SSL, ch_1, level_1 (, ch_2, level_2･･･)
level_1-4: Audio output level
-60 to 10 [Default] 0
ch_1-4: Output channel
0 = All outputs, 1 = OUT1 to 4 = OUT4
@GSL
@GSL,-4,-4,0,0
OUT1 and OUT2: -4 dB, OUT3 and OUT4: ±0 dB
@SSL,1,-4
@SSL,1,-4
If you change the output level while muted, it will be unmuted.
Relative value of audio output level
@SOL, ch_1, updown_1 (, ch_2, updown_2･･･)
@SOL, ch_1, updown_1 (, ch_2, updown_2･･･)
ch_1-4: Output channel
0 = All outputs, 1 = OUT1 to 4 = OUT4
updown_1-4: Relative value setting
-70 to 70
The specified value is added to the current audio output level. If the total value
exceeds the limit value (-60 to +10), the limit value will be applied.
@SOL,1,-1
@SOL,1,-1
If you change the output level while muted, it will be unmuted.
MSD-72 series Command Guide
59