Table of Contents
Advertisement
7.10.4 Deep Color
Menu
Top→EDID→DEEP COLOR INPUT
Setting for
Each input (only digital input)
Setting value 24-BIT COLOR [Default], 30-BIT COLOR
You can set the color depth to be output from the source device.
This menu is valid only if you select "INTERNAL EDID" for "7.10.1 EDID " and you select a resolution other
than "UNUSED" for " 7.10.3 Input resolution for AV devices".
If you select "30-BIT COLOR", compared to "24-BIT COLOR", "30-BIT COLOR" is transmitted using a higher
clock frequency, which may cause noise if a cable with a bad quality or a long cable is connected. In such a
case, the noise may be removed by setting the color to "24-BIT COLOR".
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
7.10.5 Audio format
Menu
Top→EDID→AUDIO FORMAT
Setting for
Each input (only digital input)
Setting value
Audio format
PCM
Dolby Digital
AAC
Dolby Digital+
DTS
DTS-HD
Dolby TrueHD
Default values are shown in parentheses.
You can set the audio format and maximum sampling frequency to be output from a source device.
This menu will be valid only if you select "INTERNAL EDID" for "7.10.1 EDID" and you select a resolution
other than "UNUSED" for "7.10.3 Input resolution for AV devices".
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
ON / OFF
Cannot be set
32 / 44.1 / 48 / 88.2 / 96 / 176.4 / 192 (48)
Can be set (OFF)
ON: 32 / 44.1 / 48 (48)
Can be set (OFF)
ON: 32 / 44.1 / 48 / 88.2 / 96 (48)
Can be set (OFF)
ON: 32 / 44.1 / 48 (48)
Can be set (OFF)
ON: 32 / 44.1 / 48 / 96 (48)
Can be set (OFF)
ON: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 (192)
Can be set (OFF)
ON: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 (96)
MSD-501/502/701/702 User's Guide
Maximum sampling frequency (kHz)
63
Advertisement
Table of Contents
