MSD-62 series Command Guide
3.3.10 Audio
@GSL / @SSL
Getting
Command
Response
Setting
Command
Response
Parameter
Getting
Command
example
Response
Description
Setting
Command
example
Response
Description
Remarks
@SOL
Setting
Command
Response
Parameter
Setting
Command
example
Response
Description Lower 1 dB of audio output level of OUT1.
Remarks
62
Audio output level
@GSL
@GSL, level_1, level_2, level_3, ・・・, ・・・, level_8
@SSL, ch_1, level_1 (, ch_2, level_2・・・)
@SSL, ch_1, level_1 (, ch_2, level_2・・・)
level_1-8: Audio output level
-60 to 10 [Default] 0
ch_1-8: Output channel
0 = All outputs, 1 = OUT1 to 8 = OUT8
@GSL
@GSL,-4,-4,-4,-4,0,0,0,0
Getting the set audio output level.
OUT1 to OUT4: -4 dB, OUT5 to OUT8: ±0 dB
@SSL,1,-4
@SSL,1,-4
Setting OUT1 audio output level to -4 dB.
If you change the output level while muted, it will be unmuted.
Relative value of audio output level
@SOL, ch_1, updown_1 (, ch_2, updown_2・・・)
@SOL, ch_1, updown_1 (, ch_2, updown_2・・・)
ch_1-8: Output channel
0 = All outputs, 1 = OUT1 to 8 = OUT8
updown_1-8 : Relative value setting
-70 to 70
The specified value is added to the current audio output level. If the total value
exceeds the limit value (-60 to +10), the limit value will be applied.
@SOL,1,-1
@SOL,1,-1
If you change the output level while muted, it will be unmuted.