Table of Contents
Advertisement
9.7.7 HDCP
Top → OUTPUT SETTING → HDCP OUTPUT MODE
Menu
Setting for
Each input channel
Setting value
HDCP 2.2
HDCP 1.4
HDCP INPUT ONLY
DISABLE
You can set the HDCP output for when a sink device supporting HDCP is connected.
Normally set this menu to "HDCP 2.2". The MSD encrypts optimal HDCP which HDCP 2.2 has priority.
If you select "HDCP 1.4", the MSD encrypts HDCP via HDCP 1.4 regardless which HDCP version the sink
devices have.
If you select "HDCP INPUT ONLY", the MSD encrypts HDCP only if the input signal has HDCP. However, if
input channel is changed to others and HDCP authentication status is changed, the MSD starts HDCP
authentication again. This action may take time to output video and audio.
If you select "DISABLE", the MSD never encrypts HDCP. Only the input signal which does not have HDCP
can be output.
If the sink device which does not support HDCP is connected, the MSD can output only the video and audio
which do not have HDCP regardless this menu.
Notes:
・HDCP2.2 (stream type 0) contents can be displayed on sink devices supporting HDCP1.4.
・HDCP2.2 (stream type 1) contents can be displayed on sink devices supporting HDCP2.2 but cannot be
displayed on sink devices supporting HDCP1.4.
9.7.8 The number of HDCP retries
Top → OUTPUT SETTING → HDCP ERROR RETRY
Menu
Setting for
Each output channel
Setting value ETERNITY
0 to 100
You can set the number of HDCP retries.
If a sink device with HDCP is connected and you set "9.7.7 HDCP" to "HDCP 2.2", "HDCP 1.4", or "HDCP
INPUT ONLY", HDCP is authorized regardless of the status of input signal. Normally, set this menu to
"ETERNITY" to retry the authentication automatically after the first authentication fails. However, you can set
the number of retries manually. (If retry is not succeeded even after the MSD retries for the set number of retry
times, video and audio with HDCP are not output.)
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
: Encrypts HDCP via HDCP 2.2 [Default]
: Encrypts HDCP via HDCP 1.4
: Encrypts HDPC only if input signal has HDCP
: Do not encrypt HDCP
: retry until succeeded [Default],
: 0 to 100 times
75
MSD-72 Series User's Guide
Advertisement
Table of Contents
