The Number Of Hdcp Retries [Hdcp Error Retry] - IDK msd-804fd User Manual

7.7.10 The number of HDCP retries [HDCP ERROR RETRY]

If a display device with HDCP is connected and you set "7.7.9 HDCP output [HDCP OUTPUT MODE]" to
"HDCP INPUT ONLY" or "ALWAYS", HDCP is authorized regardless of the status of input signals. Normally,
set "HDCP ERROR RETRY" to "ETERNITY" to retry the authentication automatically after the first
authentication fails. However, if you do not input signals protected by HDCP, you can set the number of retries
arbitrarily. (If retry is not succeeded even after the MSD retries for the set number of retry times, video and
audio with HDCP are not output.)
･Retry until succeeded: ETERNITY [Default]
･Not retry: 0
･Retry for the set number of retry times: 1 to 100
1. To set the number of HDCP retries using menu:
MSD-804FD
↓ SET key
[FUNCTION SELECT]
OUTPUT SETTING
↓ SET key
[OUTPUT SETTING]
HDCP ERROR RETRY
↓ SET key
[OUT1A HDCP RETRY]
ETERNITY
↓ SET key
[HDCP ERROR RETRY]
NOW UPDATE...
↓
[OUTPUT SETTING]
HDCP ERROR RETRY
Note:
If you do not press the "SET" key, the number of retries is not changed. Make sure to press the "SET" key.
*OUT1B to OUT4B are available only if HDBaseT output option is mounted.
2. To set the number of HDCP retries using commands:
@SHR: Set the number of HDCP retries
@GHR: Get the number of HDCP retries
Top
keys: Select "OUTPUT SETTING".
keys: Select "HDCP ERROR RETRY".
keys: Set the number of HDCP retries for when HDCP
authentication failed.
keys: Select the output (OUT1A to OUT4A, OUT1B to OUT4B)
Displays the message for 1 second before automatically returning to
the previous screen.
104
MSD-804FD User's Guide
For each output (OUTA and OUTB separately)
*