Table of Contents
Advertisement
MSD-701UHD / 702UHD / 801UHD/ 802UHD Command Guide
2.2.4 The number of TCP-IP connections
The MSD series can connect up to eight connections (eight ports) simultaneously. If the MSD is controlled
from nine or more PCs, they may not be connected to the MSD normally, since the number of connections
that can be used is limited.
If you use nine connections or more, execute TCP-IP connection/close every time the communication
command is sent or received from the software of user's side. By doing so, MSD's ports are occupied or
released so that nine or more connections can be connected logically.
Your PC software
TCP-IP connection
Send command (@xxx)
TCP-IP close
Note: If any command is not sent from the PC side to the MSD for 30 seconds, the MSD disconnects the
connection to avoid the limitation problem on the number of connections. As a result, connection needs to be
established again from the PC side after the current connection of the PC is disconnected.
(Since the number of ports in the MDS is eight, ports are occupied permanently if the PC is turned off while
connections are valid. To prevent this, the MSD disconnects connections if no communication command is
sent from the PC side.)
10
[Table 2.3] Increasing connections
→
→
←
→
MSD
(Occupied by 1 port)
Send back command
(@xxx)
(Release 1 port)
Advertisement
Table of Contents
