Gpio (Mio 22-23); Can1 (Mio 24-25) - Xilinx ZCU102 User Manual

X-Ref Target - Figure 3-19
Table 3-26: XCZU9EG U1 to CP2108 U40 Connections via L/S U54
XCZU9EG U1
Pin Name
PS_MIO18_AE18
PS_MIO19_AL17
PS_MIO21_AF18
PS_MIO20_AD18

GPIO (MIO 22-23)

PS-side pushbutton SW19 is connected to MIO22 (pin U1.AD20). PS-side LED DS50, placed
next to the pushbutton, is connected to MIO23 (pin U1.AD19).

CAN1 (MIO 24-25)

The PS-side CAN bus TX and RX MIO pins go through TXS0104E level-translator U33 and TI
SN65HVD232 CAN-bus transceiver U122 before being presented to the user on 0.1 inch
centered 8-pin male header J98 (see
ZCU102 Evaluation Board User Guide
UG1182 (v1.2) March 20, 2017
Figure 3-19: CP2108 Channel 1 PS-Side UART Interface
Schematic Net Name
Pin No.
AE18 MIO18_UART0_RXD
AL17 MIO19_UART0_TXD
AF18 MIO21_UART1_RXD
AD18 MIO20_UART1_TXD
Figure 3-20
www.xilinx.com
Chapter 3: Board Component Descriptions
CP2108 U40
Pin Name Pin No.
TX_0 57
RX_0 56
TX_1 49
RX_1 48
and Figure 3-21).
Send Feedback
61