B.10.2 Selecting Configuration Properties
When the Dionex PDA is added to an instrument or timebase, default
configuration properties are selected. Verify the default settings for the
detector and select other settings as required.
1. To open the configuration properties dialog box, right-click the
detector in the instrument or timebase and click Properties.
The Properties dialog box for the detector appears (see
2. Review the default settings for the detector and change any settings
that are not correct for your system. If you have questions about
parameters, click the Help button.
3. When you finish, click OK to close the dialog box.
4. On the File menu, click Save Installation to save the configuration.
Doc. 065378-01 1/12
Figure B-8. Dionex PDA Properties Dialog Box
B • Installation
Figure
B-8).
127