Status Screens - Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual

5.2 Status Screens

When the self test was successful, the initial screen changes to the status screen. The
number of measurement channels determines the appearance of the screen. Whenever the
detector is turned on, the last status screen before the power was turned off is restored
UV: On
Wavelength [nm] Wavelength [nm]
1:
3:
UV: On
The status screen shows the following information:
• Wavelengths
Status of the lamps (on or off)
•
• Mode (single wvl. or multi wvl.)
You can adjust the screen brightness or screen contrast to your requirements from
Chromeleon or on the detector display (→ page 83).
Operating Instructions
VWD-3100 and VWD-3400RS Variable Wavelength Detectors
Wavelength [nm]
254
VIS: Off
220
272
VIS: On
Fig. 17: Status screen (examples)
Mode: Single wvl.
254
2:
-
4:
Mode: Multi wvl.
UltiMate 3000 Series:
Page 57