Status LEDs
Thermo Scientific
Table 1
describes the four LEDs on the front panel of the detector (see
Figure 9.
Status LEDs for the UV/Vis detector
Power
Comm
Table 1. Status LEDs and their meanings
LED
State
Power
Green
Comm
Green
Amber
Run
Green
Flashing green
Flashing Amber
Lamps
Green
Amber
Run
Lamps
Meaning
The detector is on.
Communication to the data system computer
has been established.
There is no communication with the data
system.
The detector is ready for a run.
A run is in progress and the detector is sending
data to the data system computer.
An error has occurred during a run.
One or both lamps are turned on.
The lamps are off.
Surveyor UV/Vis Plus Detector Hardware Manual
1
Introduction
Status LEDs
Figure
9).
7