Control Elements; Keypad - Thermo Scientific Vanquish VF-D20 Operating Manual

6.3

Control Elements

6.3.1

Keypad

STATUS
Vanquish Charged Aerosol Detectors Operating Manual
The detector is designed to be operated mainly from a computer
running with the chromatography software.
In addition, the following elements are available on the detector:
•
Keypad
The keypad buttons allow you to perform certain functions directly
from the detector.
• Status indicators
The LEDs (Light Emitting Diodes) on the status indicator LED bar on
the front side of the detector and the STATUS LED on the keypad
provide a quick visual check of the operational status of the
detector.
The keypad inside the detector allows you to perform certain functions
directly from the detector. When you press a button, a short beep
confirms that the function is performed. When the detector is
connected in the Chromeleon software, some functions may not be
available from the keypad (see further down in this section).
Figure 26: Keypad
The STATUS LED provides a quick visual check of the operational status
of the detector. When the doors are closed, the LED bar on the front
side indicates the operational status.
For status details, see section 6.3.2, page 89.
6 • Operation
Page 87