Henny Penny 500 Service Manual page 88

ode1
5QO/600/561
FRO
POWE~IOFFI~UMP
SWITCH
The difference between two stage and single stage regu-
lation is the addition of a dual thermostat, a delay
timer, and a SOFT/CRISP select switch.
In the CRISP mode, the fryer operates as a standard
single stage fryer, using only the high temperature
thermostat.
In the SOFT mode, the delay timer automatically
switches the cooking temperature to the lower thermo-
stat setting at a preset time. This provides consistent
control in cooking and relieves the operator from con-
stant switching of temperature settings.
DELAY
TIMER
0-i-E: THIS IS A TYPICAL CONTROL CIRCUIT.
EFER TO WIRING S FOR THE
CTUAL WIPING F UNIT.
0
LOW TEMP.
THERMOSTAT
P SOFT
HIGH TEMP
THERMOSTAT
POWER
-TURNS ON
HEAT AND
TEMP LIGHT