Henny Penny 500 Service Manual page 60

Ste
CORNER FOLDS
12. Slide the screens into a clean filter envelope.
13. Fold the corners in and then double fold the open end.
14. Clamp the envelope in place with the two filter
retaining clips.
15. Replace the crumb catcher screen on top of the filter
paper. Screw on the suction standpipe assembly.
16. Place complete filter screen assembly back into
filter drain pan and slide pan back into place be-
neath the fryer.
17. Connect the filter union by hand.
wrench to tighten.
18. Slide the condensation drain pan back into place.
he fryer is now ready to operate.