Henny Penny 500 Service Manual page 150

he two most common causes for a fryer's inability to
pump shortening is that the pump is clogged with
breading or solid shortening has cooled and solidified in
the lines and
this procedure move
N to OFF position. Disc
main circuit breaker at the circuit breaker box and
unplug service cord from wall receptacle, or
electrical shock could result.
oosen the four allen head screws on the end of
pump and remove the cover.
,<&
,y;,:.:,
c.::
he inside is now exposed leaving a rotor an
teflon rollers. Clean the rotor and rollers.
o reassemble, place rotor on drive shaft, and
roller into rotor.