Henny Penny 500 Service Manual page 12

el
This section provides the installation instructions for the
electric and gas models of Henny Penny Pressure Fryers.
The fryer is shipped bolted to a wooden base and covered
with a cardboard container. Both gas and electric models
are shipped completely assembled. If ordered, optional
casters are packaged and shipped separately.
1. Cut the band from around the bottom of the carton.
2. Lift the carton from the fryer.
3. Open the lid of the fryer and remove the basket plus
all accessories.
4. Lay the fryer on its side, resting it in supports.
The fryer weighs approximately 300 pounds.
Care should be taken when lifting to prevent
personal injury.