Henny Penny 500 Service Manual page 117

he re
the fol
faulty fan is accom
re:
efore starting this procedure, move MAIN
BODES switch to the OFF position. Disconnect
main circuit breaker or unplug the service cord at
the wall receptacle, or electrical shock could result.
1. move control panel per paragraph 5-4.
1 and disconnect fan motor wires.
emove the four cap screws, washers and nuts sec-
uring the fan to the heat shield.
emove the fan from the heat shield.
nstall the new fan on the heat shield and secure
with the four screws, washers, and nuts.
econnect the fan motor wires.
nstall control panel per paragraph 5-4.