Henny Penny 500 Service Manual page 138

.
lace
cover on t
t.
~ockwise unti
the rear retaining hook on the lid cover in the
ot of the crossbar. e crossbar down
1111 out on the lid release pin.
lid to rear of t
Q the lid cover.
.
at lid cover is fastened
erly before
raising.
he hinge spring needs to be replace f it is broken,
cracked or otherwise looses its tension.
special spring
installation tool which greatly si
ties this procedure
is available from the factory.
nny Penny part
number 16109)
1.
11 out on the retaining pin kn on the front of
cross arm to release lid cover.
efer to lid cover
removal instructions.)
ift the cross arm up and away from the lid.
tru:
locks and hinge pin if the
ken. is not broken, use
01 as described in s 5, 6, and 7, then
remove the tru-arc lock and hinge pin.
.
The new spring is laced in the loading tool so that
g in the v-shaped center of