Henny Penny 500 Service Manual page 13

Y
61
Step 8
,.$"r>
5. Remove the four leg bolts from the wooden shipping base.
&,$
':Q&
Remove and discard the wooden base.
6. Thread the shipping bolts back into the legs to provide leveling
adjustment feet. If ordered, install casters into the legs, with the
locking casters in front.
7. Place fryer in an upright position.
The fryer weighs approximately 300 pounds (136 kg). Use
care when lifting to prevent personal injury.
8. Unthread the cap from the operating valve.
NOTE
A metal shipping support is placed within the operating valve
housing to protect the orifice and weight during shipment. This
support must be removed prior to installation and start-up.
9. Remove the weight.
10. Remove and discard the metal shipping support.
11. Clean the orifice with a dry cloth.
12. Replace the weight and cap.
13. Remove the protective paper from the fryer cabinet and clean
with cloth and detergent water.