Henny Penny 500 Service Manual page 141

1. move the four lid liner screws.
se a thin blade screwdriver to pry the lid liner
from the cover.
3. Clean the liner and the inside of the cover.
lace
the liner and screws.
he gray rubber gasket surrou
id is designed to be reversed. enny recom-
mends that this be done on a quarterly basis.
ecause of heat expansion and the pressure used for the
coo kin recess, the gasket is constantly under extreme
stress. eversing the lid gasket on a quarterly basis will
help to assure that the fryer will not lose pressure
through leakage.