Henny Penny 500 Service Manual page 109

emove the flexible conduit from the 90" elbow on
the metal heat shield.
5.
isconnect gas supply
e
(28)
from the connector
(24) at control valve. ( r to photo below.)
6. Loosen the two screws (13) on the
eflector (9), on the firebox and flue assembly and
raise the deflector to its highest position.
7.
etighten screws (13) to hold the heat shield deflec-
tor in the high position.
PEN position.
olt from rinse hose bracket.