Henny Penny 500 Service Manual page 33

er. Move the switch to
the PUMP position (right) to operate the filter pump. Certain prior
conditions, covered later in this section, must be met before operat-
ruse, or muse.
A light indicating the power switch is in the PUMP position, and
the filter pump is in use.
An electromechanical device used to regulate temperature. Turn the
knob to set the desired frying temperature.
A light indicating the shortening temperature is below the thermostat
temperature setting, and goes off when the shortening temperature
reaches the set temperature.
cycle. The timer controls the solenoid valve (item 20) and activates
the buzzer when the frying cycle is complete. Turn the knob to set
the black arrow at the desired frying time. The red arrow resets
back to the black arrow when the ON/OFF switch is moved to