(continued)
Step 5
Step 6
step 7
These handles will be hot. Use protective glove or
cloth, or severe burns will result.
7. Remove and discard old filter pad. Clean and dry pan,
frame, and grid thoroughly.
8. Place grid and new charcoal filter pad in frame with
smooth side down and secure in drain pan with
handles. Be sure the handles press down on the
protrusions on the frame, or the filter may not
function properly.
9. Slide the drain pan back into place u
and connect the filter union by hand
wrench to tighten.
10. Slide the condensation drain pan back i:
fryer is now ready to operate.
tder the fryer
Do not use a
nto place. The
4fter the initial
installation
of the fryer, as well as
>efore every change of shortening, the frypot should be
;horoughly cleaned as follows:
1. Turn the main power switch OFF.
n must be in position under the
shing or spilling of h