Henny Penny 500 Service Manual page 110

10. Remove entire gas burner assembly, by lifting and
pulling toward front of fryer.
Step 10
a. Replace thermocouple (19) as required, per
paragraph 5-17.
b. Repair or replace
gas
control valve (20) as re-
quired, per paragraph 5-18.
c. Replace orifices (8 and 17) as required.
There are 23 brass orifices and 1 stainless steel
orifice. The stainless steel orifice is to be mounted
adjacent to the pilot light.
,.<,+y,
" : !',,'
i' ,,:,5 I 0%;
11. ake other repairs or replacements as required.
nstall entire gas burner assembly.
nstall u-bolt to rinse hose bracket and gas line.
urn the filter valve handle to the CL
tion.
oosen the two screws (23) which are holding the
eat shield deflector in the high position, and lower
it to the normal operating position.
16. Tighten the two screws on the heat shiel
17. Connect gas pply line (28) to the gas control valve
connector (2
nstall the con