Henny Penny 500 Service Manual page 47

Y
el 6 1561
21. After the pressure drops to zero, turn the spindle
counterclockwise approximately one turn.
o not flip or spin the spindle cross arm when
opening because it could damage the acme nut
inside the cross bar.
22. Raise the lid promptly to allow most of the conden-
sation on the lid to drain down and out through the
drain channel and not back into the shortening.
o not let the li
am up against its backstop
because this could damage the hinge.
23. Insert the handle into the basket. Lift the basket
and hang it on the side of the frypot to drain. Allow
the product to drain approximately 15 seconds be-
fore dumping it onto a tray.
24. Place the product into a warming cabinet im-
mediately.
25. Before frying the next load, allow time for the shor-
tening to reheat. (Wait until the TEMPERATURE
light goes off.)