d. Wash all parts in soap and hot water.
If replacing Teflon seals, or complete valve, proceed to step 6,
otherwise, assemble in reverse order of disassembly.
Assemble valve core and blade (6), with the smooth side of the
hole towards the disc spring guide (9).
(See drawing on next page)
6. A repair kit (Part No. 17120) is available if any of the seals are
replaced. If any one seal is defective, all seals should be
replaced.
Remove the solenoid body from fryer to replace seals. Refer to
exploded view of solenoid on page 6- 16 to help identify all
parts.
a. Remove back cover.
ear Cover
Step
I
b. Loosen both conduit and exhaust fittings.
xhaust
Fitting
reassembled in reverse order of previous steps, or continue
onto step 7 to change the seals.