Restore The Factory Settings (Without Safety Functions) - Siemens SINAMICS G120 Operating Instructions Manual

Low voltage inverters built-in units with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for SINAMICS G120:

Table of Contents

Restore the factory settings (without safety functions)

Restore the factory inverter settings

Procedure with Startdrive

1. Go online.

2. Select "Commissioning".

3. Select "Backing up/reset".

4. Select "All parameters are reset".

5. Press the "Start" button.

6. Wait until the inverter has been reset to the factory setting.

You have reset the inverter to the factory settings.

Procedure with the BOP-2 operator panel

1. In the "Options" menu, select the "DRVRESET" entry

2. Confirm the reset using the OK key.

3. Wait until the inverter has been reset to the factory setting.

You have reset the inverter to the factory settings.

Converter with the CU250S-2 Control Units

Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG

Commissioning

5.5 Restoring the factory setting