Siemens SINAMICS G120 Operating Instructions Manual page 369

Low voltage inverters built-in units with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for SINAMICS G120:

Table of Contents

You have backed up the settings of the inverter to the memory card.

Converter with the CU250S-2 Control Units

Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG

3. Set the number of your data backup. You can back up 99 different settings

on the memory card.

4. Start data transfer with OK.

5. Wait until the inverter has backed up the settings to the memory card.

Saving the settings and series commissioning

7.1 Saving settings on a memory card