Factory Interface Settings - Siemens SINAMICS G120 Operating Instructions Manual
Low voltage inverters
built-in units with cu250s-2 control units and
encoder evaluation
Hide thumbs
Also See for SINAMICS G120:
- List manual (1256 pages) ,
- Manual (732 pages) ,
- Operating instructions manual (550 pages)
Table of Contents
Advertisement
Installing
4.5 Connecting the interfaces for the inverter control
4.5.5
Factory interface settings
The factory setting of the interfaces depends on which fieldbus the Control Unit supports.
Control Units with USS or CANopen interface
The fieldbus interface is not active.
Figure 4-16
Factory setting of the CU250S-2 and CU250S-2 CAN Control Units
96
Converter with the CU250S-2 Control Units
Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG
Advertisement
Table of Contents
