Parameter
Description
p1076[0...n]
CI: Supplementary setpoint
scaling
r2050[0...11]
CO: PROFIdrive PZD receive
word
Further information
For further information refer to the function diagrams 2468, 9360 and 3030 of the List Manual.
Converter with the CU250S-2 Control Units
Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG
Setting
Signal source for scaling the supplementary setpoint
Factory setting: 0
Connector output to interconnect the PZD received from the fieldbus con‐
troller in the word format.
[1] Most standard telegrams receive the speed setpoint as receive word
PZD02.
Advanced commissioning
6.18 Setpoints
263