Topology Example Without Safety Integrated Functions - Siemens SINUMERIK 828D PPU Series Manual

Number Port 1 at the PPU
of axes
8 1 x LM
4 x MoMo
1 x SMy at the 4th MoMo
8 1 x LM
4 x MoMo
1 x SMy at the 4th MoMo
SINAMICS S120 Combi
3 3x Combi
1xSMy at the Combi
4 3x Combi
1xSMy at the Combi
4 4x Combi
1xSMy at the Combi
5 4x Combi
1xSMy at the Combi
6 4x Combi
1xSMy at the Combi
5.4

Topology example without Safety Integrated functions

Note
These wiring examples are valid using the standard clock cycle setting and do not take into
account any Safety Integrated functions.
For further notes on Safety Integrated functions, see the
SINAMICS S120 Safety Integrated Function Manual.
PPU
Manual, 01/2014, 6FC5397-2DP40-3BA3
Port 2 at the PPU
X100
1 x TM54F
1 x Hub DMx
4 x SMy at the Hub DMx
1 x TM54F
1 x Hub DMx
5 x SMy at the Hub DMx
1 x booksize compact
1 x booksize compact
2 x booksize compact
5.4 Topology example without Safety Integrated functions
Port 3 at the PPU
X101
1x MoMo
1 x SMy at NX10.3
1 x SMy at TM54F
1 x SMy at the 3rd MoMo
2x MoMo
1 x SMy at NX10.3
1 x SMy at the 2nd MoMo
not used
2 x SMy at the Hub DMx
3 x SMy at the Hub DMx
not used
3 x SMy at the Hub DMx
4 x SMy at the Hub DMx
5 x SMy at the Hub DMx
Rules for permitted topologies
Example in the figure:
X102
1 x NX10.3 Topology with SINAMICS
1 x TM54F S120 Booksize 5+3 axes
3 x MoMo
1 x NX10.3 Topology with SINAMICS
1 x TM54F S120 Booksize and 6+2
2 x MoMo
1 x TM54F
1 x Hub DMx
1 x TM54F
1 x Hub DMx
1 x TM54F
1 x Hub DMx
1 x TM54F
1 x Hub DMx
1 x TM54F
1 x Hub DMx
(Page 63)
axes (Page 63)
---
---
---
---
---
59