Parameter
p1511
p1520
p1521
p1530
p1531
Additional information about this function is provided in the parameter list and in function
diagrams 6030 onwards in the List Manual.
6.21.5
Application examples for closed-loop motor control
Additional information for setting the closed-loop motor control in certain applications is
provided in the Internet:
support.industry.siemens.com/cs/de/en/view/103156155)
Converter with the CU250S-2 Control Units
Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG
Description
Additional torque
Upper torque limit
Lower torque limit
Motoring power limit
Regenerative power limit
Engineering and commissioning series lifting equipment/cranes
Advanced commissioning
6.21 Motor control
(https://
315