Line Filter - Siemens SINAMICS G120 Operating Instructions Manual

Low voltage inverters built-in units with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for SINAMICS G120:

Table of Contents

Line filter

With a line filter, the inverter can achieve a higher radio interference class.

Overloading the line filter when connected to line supplies that are not permissible

The line filter is only suitable for operation on TN or TT line supplies with a grounded neutral

point. If operated on other line supplies, the line filter will be thermally overloaded and will be

● For inverters equipped with line filter, only connect to TN or TT line supplies with a

External line filters for PM250

Power Module

Converter with the CU250S-2 Control Units

Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG

grounded neutral point.

6SL3225-0BE25‑5AA0,

6SL3225-0BE27‑5AA0,

6SL3225-0BE31‑1AA0

3.5 Components for the Power Modules

Class B line filter according to

EN55011: 2009

7.5 kW ... 15.0 kW

6SL3203-0BD23-8SA0