Siemens SINAMICS G120 Operating Instructions Manual page 135

Low voltage inverters built-in units with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for SINAMICS G120:

Table of Contents

Positioning drive with one or two

encoders and Extended safety

Qualitative utilization level of the inverter using function modules

The computational performance of the inverter is designed for typical inverter applications.

Every configured function module uses part of the computational performance of the inverter.

If you enable all of the inverter function modules, then the inverter responds with a fault,

because its available computational performance is exceeded.

Only configure function modules that you actually require for your particular application.

Further information is provided on the Internet:

Converter with the CU250S-2 Control Units

Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG

that have been released

FAQ combination of functions

Speed-controlled drive with an

encoder, free function blocks

and Extended safety functions

(http://support.automation.siemens.com/WW/view/en/

Commissioning

5.3 Preparing for commissioning

Available function modules