Adapt The Default Setting Of The Terminal Strip - Siemens SINAMICS G120 Operating Instructions Manual

Low voltage inverters built-in units with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for SINAMICS G120:

Table of Contents

Advanced commissioning

6.3 Adapt the default setting of the terminal strip

Adapt the default setting of the terminal strip

In the inverter, the input and output signals are interconnected with specific inverter functions

using special parameters. The following parameters are available to interconnect signals:

● Binectors BI and BO are parameters to interconnect binary signals.

● Connectors CI and CO are parameters to interconnect analog signals.

This chapter describes how you adapt the function of individual inverter inputs and outputs

using binectors and connectors.

Internal interconnection of the inputs and outputs

Converter with the CU250S-2 Control Units

Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG