Installing Reactors, Filters And Braking Resistors - Siemens SINAMICS G120 Operating Instructions Manual

Low voltage inverters built-in units with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for SINAMICS G120:

Table of Contents

Installing reactors, filters and braking resistors

The following supplementary components may be required depending on the Power Modules

and the particular application:

● Line reactors

● Braking resistors

● Brake Relay

Installing these components is described in the documentation provided.

Converter with the CU250S-2 Control Units

Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG

4.2 Installing reactors, filters and braking resistors